B1

Single Cell Tester / Balancer

MEASURE CELL VOLTAGES: · M1 [A123 Systems/DeWalt 36V] · LiPo · 4-cell Receiver Packs · 5-millivolt resolution

BALANCE CELLS: · M1 & LiPo · Charge or Discharge · Charge From: - RX pack - ESC w/BEC - 5V Supply

We're pleased to introduce the B1 single-cell tester & balancer. B1 allows simple measurement of individual cell voltages for M1 (A123 Systems/DeWalt 36V) packs. It uses the balancing tap connector to measure cell voltages and either discharge or charge each cell. It can also be used on LiPo packs and for measuring 4-cell receiver packs. It provides 5-millivolt resolution, and can be read outdoors. To learn more about B1, you can read the instructions in .pdf format.

	B1 - $29.95 - includes US shipping
	B1 - $32.95 - includes non-US shipping
	B1+ - $34.95 - includes 2-mm. adapter & US shipping
	B1+ - $37.95 - includes 2-mm. adapter & non-US shipping

B1+ includes an adapter to use B1 with 2-mm. connectors (Thunderpower, FMA). Five bucks seems like a lot for a small connector you'll probably lose, but it's a real pain to make.