Install ElectriCalc Version 2.2 Tutorial

. ElectriCalc Version 2.2 Tutorial

5 MB
18 minutes 52 seconds over a dial-up connection
2 minutes 9 seconds over a broadband connection

Click Download to save the program for installation at another time, or to download and run the installation now.

This tutorial will give you a good overview of how ElectriCalc works.
The tutorial is very large because of a huge amount of overhead to support all the operating systems.
It will run on Windows 95 and newer systems. It will not run on Windows 3.11 systems.

We've always discouraged direct sales in favor of supporting your favorite eflight dealers. However, there are a few support areas that we've decided to take on. The first is free upgrades. These are available for download, but for those who prefer a CD, we offer this for $5 ($8 outside of US). Also, since V2 has been out for 5 years, dealers don't normally carry V1 upgrades. We now offer the V2 upgrade on CD for $10 including S&H ($13 outside of US). Since we lost our European dealer, we now offer the latest ecalc for non-US customers for $42 including S&H. Again, please support our dealers whenever you can.
Upgrade CD to V2.20 for V2 users - $5 including US S&H.

Upgrade CD to V2.20 for V2 users - $8 including non-US S&H.

Upgrade CD to V2.20 for V1 users - $10 including US S&H.

Upgrade CD to V2.20 for V1 users - $13 including non-US S&H.

ElectriCalc V2.20 for international customers - $42 including non-US S&H.

. ElectriCalc Version 2.2 Tutorial
5 MB 18 minutes 52 seconds over a dial-up connection 2 minutes 9 seconds over a broadband connection
Click Download to save the program for installation at another time, or to download and run the installation now.
This tutorial will give you a good overview of how ElectriCalc works. The tutorial is very large because of a huge amount of overhead to support all the operating systems. It will run on Windows 95 and newer systems. It will not run on Windows 3.11 systems.